VTAC USER MANUAL
VPC
10/10/2022
For more information visit vpc.com
15
REMOVING FROM PRESS
11. Once done pressing, remove the tool base (
Figure J
).
12. Remove top half of the tool from the PCB assembly by pushing on the front
surface. After the tool has been released, lift it off the PCB (
Figure K
).
13. Verify that the header(s) are fully seated against the board along the
edge (
Figure L
).
USING VTAC RIGHT ANGLE HEADER INSTALLATION TOOL (cont'd)
PART # 910 112 132 , 610 151 104
Figure L.
Verify proper installation.
FULLY SEATED
Figure K.
PUSH TO
RELEASE
TOOL
ONCE THE TOOL
IS RELEASED
LIFT OFF HEADERS
Figure J.
Remove base.
REMOVE BASE