9050 USER MANUAL
VPC
07/19/2022
For more information visit vpc.com
15
ITA ENCLOSURES
PART # 410 112 463, 410 112 519, 410 113 214, 410 104 538
Figure A.
Enclosures must be flush with the bottom of the ITA frame to ensure
mating with the 9050TR receiver. The width of the enclosure may grow with
customer needs, as long as the extended width is offset to the side opposite the
engagement handle. There is no limit to the height of the enclosure.
NOTE:
VPC offers several standard ITA enclosures, as well as custom
enclosures. The 9025, 25 module ITA enclosure, is compatible with the
9050 if a smaller ITA enclosure is desired. Visit vpc.com for all available
options for the 9050 and 9025 ITA.
TOOLS REQUIRED
3 mm Allen Wrench
Phillips Head Screwdriver
STANDARD ENCLOSURES
1.
To mount ITA frame,
align frame with enclosure.
2.
Insert screws and tighten with Allen Wrench. Torque 6-8 in. -
lbs. for 4-40 screws.
CUSTOM 9050TR ENCLOSURES
When building a customized ITA enclosure, these guidelines
should be followed to ensure proper mating with the 9050TR
receiver (
Figure A
):
•
When mounting, the ITA frame must be flush with the
bottom of the enclosure
•
The width of the enclosure may longer than the ITA frame,
as long as the extended width is offset to the opposite side
of the receiver’s engagement handle
•
There is no limit to the height of the enclosure.
Opposite side of ITA on standard ITA Enclosure with hinged
cover for easy interior access.
ITA side of standard ITA Enclosure ITA frame ready for
mounting.