Voyager VYDVD7, Инструкция по эксплуатации

Страница: 36 / 80

34
TROUBLE SHOOTING
Solution Problem
DVD player will not work.
The DVD player has blank screen
and will not operate even though
switch is in the ON position.
The disc will not play.
The picture is pixilated or distorted.
No picture.
Lines on the screen.
The icon appears on screen.
Can’t advance through a movie.
No sound from the speakers.
No sound or distorted sound.
Apply power to the DVD player by using the supplied car
power cable.
Check DVD player On / Off switch is in the On position.
Check the fuse within the car power cable, see page 19.
Check the power LED indicator is illuminated on the DVD
player, if not then the car power cable or DC IN socket
may have been damaged, please contact your local
VOYAGER dealer for further information.
The DVD player will be in Auto-Standby shutdown.
Using the ON / OFF switch turn off and on, normal
operation should be available.
The Auto-Shutdown function can be turned off in the setup
menu.
The disc may be damaged or dirty, clean the disc and try
once more. If the disc will still not play try another.
Poor playback may be caused by dirt on the laser lens,
use a clean, dry cotton bud (add pure alcohol sparingly
if available) and wipe the cotton bud across the lens VERY
gently, the lens is held by spring suspension, so be very
careful.
The disc may be damaged or dirty, clean the disc and try
once more. If the disc will still not play try another.
Check that the screen is closed firmly.
Check the smashed screen identification information.
Check the DVD player is in DVD mode.
Check the smashed screen identification page. Any
permanent diagonal lines are indication of breakage. The
screen glass does NOT fall out, as this is a safety feature.
The requested operation is not allowed at this time.
You can’t advance through the opening credits and
copyright warnings at the beginning of a movie as the disk
is programmed to prevent this.
Check the player by using headphones. If these are
working normally then the headphone connector is
damaged and needs repairing.
Turn the volume UP on the remote control.
Ensure that the MUTE key has not been pressed.
Advance the movie to a section where sound should be
heard. Press the AUDIO button on the remote control to
choose an alternative.