NOTE: The use of the Trim buttons are accompanied with a beep tone. A single long beep indicates the product is
centre-trimmed. No beeping after press the trim button indicates the product is trimmed to the maximum on a particular side.
UNDERSTANDING TRIM ADJUSTMENTS
Forward/Backward Trim
• If your PA-1008 is moving forwards or backwards automatically, you may need to adjust the
FORWARD/BACKWARD TRIM buttons.
•�If your PA-1008 flies forward, push and release the Backward TRIM button repeatedly until the
moving stops and proper flight is maintained.
•�If your PA-1008 flies backwards, push and release the Forward TRIM button in the same manner until
the problem is resolved.
• From time to time you may have to adjust the FORWARD/BACKWARD TRIM to ensure the PA-1008
will hover in mid-air and respond accurately to your commands.
Banking Left/Right Trim
• If your PA-1008 is not steadily hovering and is banking to the left or right automatically, you may need to
adjust the BANKING TRIM buttons.
• If your PA-1008 banks to the left, push and release the R Trim button repeatedly until the banking stops
and proper flight is maintained.
• If your PA-1008 banks to the right, push and release the L Trim button in the same manner until the
problem is resolved.
• From time to time you may have to adjust the BANKING TRIM to ensure the PA-1008 will and respond
accurately to your commands.
RECOGNIZING THE FRONT AND REAR OF THE PA-1008
Even though the PA-1008 has four rotors there is still a front or
forward-facing direction and back or backwards-facing
direction. The Front and forward-facing direction of the
PA-1008 is the side with two grey propellers. The rear and
back of the PA-1008 is the side with two black propellers and
where the battery compartment is. The PA-1008 when in
flight will also help you keep aware of the orientation with
lighted LED lights in the arms of the PA-1008.
NOTE: The front of the drone displays WHITE LED light and the
back of the drone displays RED LED light.
Forward/Backward
Trim Controls
Push backward trim button
Push forward trim button
If flying forward...
If flying Rightward...
If flying Leftward...
If flying backward...
Left/Right Banking Controls
Push the “ L ” trim button
to increase left banking
sensitivity
Banks Trim
Banks Trim
AUTOMATICALLY TAKE OFF / LAND
Make sure you have properly synced The PA-1008.
• simply press the Auto Start/Land button, your PA-1008
will automatically take off.
• To stop or land the PA-1008 just Press the Auto Start/Land
button again and the PA-1008 will descend and land
automatically.
Tips: You also can move the two control sticks simultaneously
down inside or outside corners, hold them till you hear a “beep”
and the blades start spinning. Release the control sticks and
push the throttle stick slowly to take off manually.
Forward/Backward Trim
Push the “ R ” trim button
to increase Right banking
sensitivity
5
6
Front
Rear
If you have successfully synced your PA-1008 to your controller as explained on page 4 you are now ready
to fly. Before beginning to fly your drone you should familiarize yourself with how to start and stop the
rotors, how to use your take off and auto land feature and how the controls work. please carefully read and
familiarize yourself with various control features explained in the next few pages. Once again as a beginner
pilot you should learn how to control your drone in a large open field or park on a day with zero or very
light wind. Do not try to fly your PA-1008 too high until you become a more experienced pilot.
NOW YOU ARE READY TO FLY!
UNDERSTANDING THE ALTITUDE LOCK
The PA-1008 has a unique Altitude Lock function. With the help of air pressure sensor you can control,
your PA-1008 more stable than ever. The sensor locks in the altitude of the drone while allowing the user
to adjust the directional control without having to hold the throttle.
After starting the drone, fly upwards to a safe height. Once at a safe height, let go of the throttle control,
your PA-1008 should lock in the altitude and allow the user to focus on getting used to the directional
controls.
NOTE: The altitude sensor does have some tolerance based on atmospheric conditions and could have a
slight variation in altitude.
SPEED SETTING BUTTON
The PA-1008 has 4 speed Modes;
T(Training),1(SLOW),2(MEDIUM)
and
3(HIGH)
. The Default setting
when you first turn on your PA-1008 is
1(SLOW)
. Short press speed button you can switch among the 3
speed settings.
T (Training)MODE
Simply press and hold the Speed Button,you will hear a long beep indicating you are in T Mode now.
T mode allows you to learn how to operate your PA-1008 at a very slow speed. Also there are maximum
and minim height limits set to avoid crashing to ceiling or floor in T mode. To exit T mode just press the
speed setting button again.
