CONNECTIONS
(Continued)
AV1 (SAT/VCR)
Connect the audio and video output jacks of the AV equipment (VCR, Satellite receiver, etc.) to the audio and
video input jacks on the unit with an audio/video cable.
If the AV equipment has a bitstream/PCM coaxial audio out jack, connect the equipment to the unit by using a
coaxial cable.
AV2 (DVD)
Connect the audio and video output jacks of the DVD player to the audio and video input jacks on the unit with
an audio/video cable.
Connect the coaxial digital audio output jack of the DVD player to the DIGITAL AUDIO IN on the unit by using
a coaxial cable.
TV
Connect the audio and video input jacks of your TV to the audio and video output jacks on the unit with an
audio/video cable (included). Refer to your TV’s owner’s manual.
To record the playing signal, connect AUDIO OUT to the recordable equipment (Recordable cassette player,
Recordable MD player, etc.).
Watching a DVD
1. Connect the unit to the TV and the DVD player.
2. Turn on the unit and press the AV2 button on the remote control to select AV2 “auto-detect/auto-switch”
mode, or press AV2 button on the front panel directly. If no sound in digital input mode, press AV2 button
again to switch to AV2 “force analog” mode. The AV2 indicator will blink.
3. Turn on your TV and select the corresponding video input that you have connected to the unit.
4. Turn on your DVD player to start playing.
Video & Audio Input/Output Setting
E - 7
:Signal flow
TV with AV input
Recordable equipment
Yellow /
White
Red /
SAT/VCR
DVD player with
Digital Out (Coaxial)
Yellow /
White
Red /
Yellow /
White
Red /
Coaxial cable (sold separately)
Coaxial cable (sold separately)
