Voxx PNMAL2, Быстрый старт

Страница: 8 / 12

8
Pair the Project Nursery
camera with the App
(continued)
8
+ Make sure your phone or tablet is connected to
the WiFi network you want to use.
+ Make sure the camera is getting a good signal
from your WiFi router. See step 3 for more
information.
+ Test your WiFi network with other devices to
make sure its working.
+ Double check that you’ve entered the correct
password for your WiFi network in the Project
Nursery App.
+ Make sure your router is broadcasting its SSID
(name). The Project Nursery camera does not
support hidden SSIDs.
+ Make sure that Wi-Fi signal is 2.4GHz. The
Project Nursery camera does not support 5GHz
WiFi.
+ Make sure that your WiFi router uses either
WPA2-PSK/WPA-PSK or AES as its encryption
method.
+ Make sure that there is no MAC filter on router
or add MAC address to router whitelist.
+ Reset the camera to set up connection again.
Press and hold SET button on the bottom of
the camera for 10 seconds. The camera gives a
long beep when it is fully reset.
Connection Troubleshooting
For additional assistance, please
call 1-844-393-7338.
9
Once the camera
has successfully
connected to your
WiFi network, you’ll
see the Success
screen in the App and
the indicator light
on the back of the
camera will turn green.
Congratulations—
you’ve just set up
your first camera!
IMPORTANT: If your
camera does not connect,
follow the instructions in
the App to troubleshoot.
Congratulations!
Camera successfully added!
Configure WiFi
Problems connecting?
If the Add new camera with WiFi method
doesn’t work, try the Add new camera with QR
code method. Choose Add Camera , then Add
new camera with QR code
and follow the on-
screen directions.