3
Step 3: Put the mic stand together
Unfold the microphone stand’s tripod base
and tighten the knob in the
center of the base to lock it into place.
Adjust the height of the stand
by
turning each clutch counterclockwise
and lifting the pole to the desired
length.
Make sure to tighten each clutch (turn
clockwise) before you proceed.
Clutches
Microphone
stand
Attach the device cradle to the stand
using the locking knob. Place the
cradle on the top of the stand. Then
insert the locking knob in the hole
on the back of the device cradle and
tighten it until the cradle feels secure.
Do not overtighten!
Microphone
stand
Locking
knob
Device
cradle,
back
Step 4: Plug in
Plug the power cable into the
POWER
jack on the right side
of the Singsation Main Stage base.
Plug the other end of the power cable into a working outlet
or surge protector.
