VoxPower NEVO+600 Series, Руководство по установке

Страница: 4 / 4

Page 4 of 4 Vox Power Limited | Unit 2, Red Cow Interchange Estate, Ballymount, Dublin 22, D22 Y8H2, Ireland | T +353 1 4591161 | www.vox-power.com
DOC-MN-001-05, NEVO+600 Series Installation Manual
Connector details
PINOUTS INTERNAL CIRCUITRY
Circuit Details INHIBIT
J1 – Mains Input
1 Live
2 Earth
3 Neutral
J2 – Global Signals
1 Slot A - Power Good
2 Slot A - Inhibit POWER GOOD
3 Slot B - Power Good
4 Slot B - Inhibit
5 Slot C - Power Good
6 Slot C - Inhibit
7 Slot D - Power Good
8 Slot D - Inhibit
9 Global Inhibit (GINH)
10 AC OK AC OK
11 +5V (Bias Supply 1A)
12 COM
J3 - Output Power
Positive Output
J4 - Output Power
Negative Output
J5 (4) - Output Signals
1 - Sense
2 + Sense
3 V
CONTROL
4 I
CONTROL
5 COM
6 +5V (Bias Supply 10mA)
MATING CONNECTORS
Ref. Details Manufacturer Housing Terminal
J1 - Mains Input 3 Pin, 5.08mm with friction lock, 18-24AWG MOLEX (2) 010013036 8701031
J2 - Global Signals 12 Pin, 2mm, 24-30 AWG, WIRE TO BOARD MOLEX
(2)
0511101251 0503948051
J3,4 (1) – Output Power Faston/Quick-Connect Tab – Size 6.35x0.8mm VARIOUS (2) VARIOUS
J5 - Output Signals 6 PIN, 1.25mm, with Friction Lock, 28-30AWG MOLEX (2) 1510210600 50058800
Notes
1. Terminal and wire current rating must exceed maximum short circuit output current. Eg. Output 1 = 25A*1.25 = 31.25Amps
2. Direct equivalents may be used for any connector parts.
3. All cables must be rated 105°C min, equivalent to UL1015.
4. Pinout is for single output types only.
PART NUMBERS AND ORDERING INFORMATION
Series name NEVO+600 M L - 1 1 2 3 - 0 0 0 Factory Use
Leakage Current
M = Medical, S = Industrial
Use '0' for unused slots.
Blanking plates will be
inserted at factory.
Fan
Blank = Standard,
L = Low Noise
Slot A - Output # Slot D - Output #
Slot B - Output # Slot C - Output #
Industrial input module has ITE approvals (IEC60950 & IEC62368), Medical input module has medical approvals (IEC60601)
Contact your Distributor or Vox Power for special configuration requirements. The factory may allocate a 3 digit suffix to identify such requirements.
When ordering an input unit with no outputs inserted, use NEVO+600M/ML or NEVO+600S/SL.
Unless stated otherwise, all dimensions are in millimetres and in accordance with DIN2768-1/2 CLASS C
-
+
Circuit # 2
Circuit # 1
J2