22
ENGLISH
PART NAMES AND FUNCTIONS
21. Power switch
Turn this unit power ON/OFF.
CAUTION
: Before you turn the power on be sure you have made all connections to the mixer. Also be
sure you amplifiers are turned off.
CAUTION
: Remember to avoid damaging pops to the speakers, the mixer is turned on first and turned
off last.
22. Power cord fastener
To fasten the power cord to avoide unpluging the cord by accident.
23. Fader start sontrol jack
This jack is used to control the “FADER START” function between the mixer and a compatible Player. Using
the mini plug included with your player, connect from the player controller out jack to this jack. CH-A “FADER
START” functionality will be controlled by the left side (A) of the CROSSFADER. CH-B “FADER START”
functionality will be controlled by the right side (B) of the CROSSFADER. For more information on “FADER
START” functionality refer to the user manual included with your player. Be sure to only use the mono tip mini
plug included with your player to avoid damage to the mixer and/or the player.
24. Mic input jack
This jack will accept a standard 1/4” (6.3mm) male plug.
25. GND (GROUND TERMINAL)
Be sure to connect turntable ground leads to either or both of the two available ground terminals. This will
reduce the humming and popping noises associated with magnetic phono cartridges.
26. LINE/PH (Phono) selector switches
These switches are used to change the mode of phono input jacks
27
. When connecting turntable to these
jacks be sure the switch is in the PH (phono) position, and when using line level input devices select LINE.
REAR PANEL
31
30 29
24
25
25
26
23
21
22
28 27 26 28 27
Содержание M10
Страница 1: ...User Manual M10 2 channel mixer ...
Страница 14: ...Printed in China VERSION 1 0 ...