Voxoa M10, Руководство пользователя

Страница: 10 / 14

24
ENGLISH
1. Make certain power is off while making connections.
2. Quality cables make a big difference in fidelity and punch. Use high-quality, audio cables.
3. Do not use excessively long cables. Be sure plugs and jacks are securely fastened. Loose connections cause
hum, noise, or intermittence that could damage your speakers.
4. Connect all stereo input sources. Then connect any effects into the stereo Effect, if used. Connect your
Microphone(s) and monitor headphones. Make sure all faders are at “zero” and the unit is off. Take care to
connect only one cable at a time. Pay attention to L and R position of jacks, on both the VOXOA M10 and
outboard gear.
5. Connect the stereo outputs to the power amplifier(s) and/or tape deck(s) and/or MD recorder(s) and/or CD
recorder(s).
CAUTION
: Always switch on your audio input sources such as CD players first, then your mixer, and finally
any amplifiers. When turning off, always reverse this operation by turning off amplifiers, then
your mixer, and then input units.
CONNECTIONS