6. LED indicator
LED indicator
Status of headset
Red and blue LED flashes
alternately
Pairing mode
Blue LED flashes once every 2
seconds
Not connected to device
Blue LED flashes twice every 4
seconds
Connected to device
Red LED flashes instead of blue
LED
Low battery
7. Factory Reset
In the status of charging, long press “+” button about 4 seconds and release
it until the red and blue LED flashes simultaneously, you will hear 4 prompt
tone.
Remarks:
After factory reset, the paired list of headset will be deleted. After turn it on
again, the headset will enter pairing mode automatically, and you need to
re-pair and connect with Bluetooth devices.
Care and maintenance
Read the following recommendations carefully before using VOX622.
Following these you will be able to enjoy this product for many years.
Keep it dry and don’t put it in the dump place to avoid the product’s
internal circuit being affected.
Keep the product away from direct sunlight or hot places. High
temperatures will shorten the life of electronic devices, destroy the
battery or distort certain plastic parts.
Don’t expose the product to cold areas. It may damage the internal circuit
board.
Don’t try to disassemble the product as it may get damaged if you are not
professional.
Don’t let it fall down onto the floor or other hard surfaces. The internal
circuit might get damaged.
Don’t use intensive chemical products or detergent to clean the product.
10