Remove the battery cover, and insert two AAA (1.5V) batteries; make sure that the polarity of the
battery is consistent with the marks “+/-” in the battery slot.
Before power-on platform, please make sure that
the power supply is stable. Insert the power plug
into the outlet. Press “0” button on the TV (If it
doesn’t have this button, you needn’t operate this
step), then press key to turn on the TV.
When the TV is working, pressing key, the TV
will enter standby mode
Special note:
This device adopts energy saving technology:
•
If there is no signal input in power on state, the TV set enters standby state automatically
after five minutes
•
When the schedule power off time is reached, the TV set enters standby state automatically
5.1 Installing battery
5.1 Precautions of remote cotrol usage
5. Remote Control
•
Point the remote control to the receiver window. The objects between remote control and
the receiver window may disturb the normal operation
•
Keep the remote control away from strong vibration. In addition, do not set or put the
remote control in direct sunshine, which may result in deformation of the remote control
•
The remote control may be invalid if the receiver window is in direct sunshine or strong light;
in this case, please adjust the angle of the light or the device, or approach the remote control
to the receiver window
•
The effective range of the remote control may be affected if the battery voltage is low; in this
case, please replace with a new battery; if the remote control won’t be used or battery
voltage is too low, please take out the battery to avoid corrosion due to battery liquid leakage
•
Do not mix different types of battarias, or used and new batteries
•
Do not throw the batteries into fire, charge or break up, or charge, short circuit, disassemble,
heat or burn the used batteries. Please follow the environmental protection regulations to
disposal of the batteries
Power on
Power off
6. Turning on/Standby
