Vox VTX150 neodymium, Руководство пользователя

Страница: 23 / 44

23
If you’ve assigned the PITCH parameter of the PITCH SHIFT effect, the mini-
mum value will be “0” (no pitch shift) and the maximum value will be the
current value.
NOTE: If you’ve assigned the input level of the delay or reverb effect to
the expression pedal, you won’t be able to change the minimum and
maximum values.
To change the minimum and maximum values, proceed as follows.
1.
Use the knob or switch of the parameter that’s already assigned.
The VC-12SV’s pedal LED (the LED at the upper left of the expression pedal)
will blink for one or two seconds.
HINT: When you use the knob or switch of the already-assigned param-
eter, the pedal LED will blink in a different way than for other param-
eters.
2.
Press the pedal switch twice in succession.
The pedal LED blinking will slow; now you can specify the minimum and
maximum values.
HINT: In the case of parameters whose minimum and maximum values
can be adjusted, rapid blinking will continue for one or two seconds after
you press the pedal switch the first time. Press the pedal switch once
again while the rapid blinking continues.
3.
To adjust the minimum value, return the expression pedal all the way toward
yourself, and then use the knob or switch of the assigned parameter.
4.
To adjust the maximum value, advance the expression pedal all the way away
from yourself, and then use the knob or switch of the assigned parameter.
5.
Press the pedal switch.
The LED will stop blinking, and will return to its previous state.