Vox Valvetronix VT100, Руководство пользователя

Страница: 4 / 32

4
Introduction
Welcome!
Thank you for purchasing the VOX VT15, VT30, VT50 or VT100 Valvetronix amp.
To help you get the most out of your new amplifire, please read this manual carefully.
Get ready to enjoy the VT-series amazing guitar sounds!
Main features
➢
The VT-series use Valve Reactor technology, and feature a power amp circuit con-
taining a 12AX7 (ECC83) dual triode valve (“vacuum tube”) that would normally be
used in a preamp. This allows the amp to produce the true sound and feel of a bona
fide all valve (tube) amp.
➢
Sophisticated modeling technology is used to provide twenty-two different amps.
➢
Twelve high-quality effects are built-in. Of these, reverb is available at all times, and
three of the remaining eleven effects are “multiple effects” that allow you to use up
to three effects simultaneously. Noise reduction can also be used simultaneously.
➢
You can create a sound using the desired amp and effect, and save it in memory as
one of eight programs (two banks x four channels). Programs can be switched while
you perform, either from the top panel or from a foot switch connected to the rear
panel (Channel Select mode). For each amp model, three preset programs – Basic
Effected, and Song – are provided, giving you a total of 66 programs (Preset mode).
The song programs reproduce the tones of classic hits played by famous guitarists.
➢
Manual mode lets you use the VT-series as a conventional guitar amp. The physical
positions of the actual knobs will be reflected by the sound.
➢
An optional VOX VFS5 foot switch (sold separately) can be connected, allowing you
to switch programs or turn effects on/off with your feet.
➢
The power level control lets you adjust the output wattage of the power amp. Even
with the master volume set to the maximum so that the Valve Reactor power amp is
loaded, you’ll still be able to adjust the volume without impairing the tonal character.
➢
The external speaker out jack (VT50/VT100 only) lets you connect a guitar speaker
cabinet (8 ohm) of your choice.
➢
The effect send/return jacks (VT100 only) allow you to connect your external effect
processor in a loop connection.