background image

IMPORTANT SAFETY INSTRUCTIONS

• Read these instructions.

• Keep these instructions.
• Heed all warnings.
• Follow all instructions.

• Do not use this apparatus near water.
• Mains powered apparatus shall not be exposed to dripping or

splashing and that no objects filled with liquids, such as vases, shall
be placed on the apparatus.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in accordance with the

manufacturer's instructions.

• Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that
produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet. (for USA and Canada)

• Protect the power cord from being walked on or pinched particularly

at plugs, convenience receptacles, and the point where they exit
from the apparatus.

• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for

long periods of time.

• Turning off the power switch does not completely isolate this product

from the power line so remove the plug from the socket if not using it
for extended periods of time.

• Install this product near the wall socket and keep the power plug

easily accessible.

• WARNING—This apparatus shall be connected to a mains socket

outlet with a protective earthing connection.

• Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been
dropped.

• Do not install this equipment on the far position from wall outlet and/

or convenience receptacle.

• Do not install this equipment in a confined space such as a box for

the conveyance or similar unit.

• Excessive sound pressure from earphones and headphones can

cause hearing loss.

• Use only with the cart, stand, tripod, bracket, or table specified by

the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.

The lightning flash with arrowhead symbol
within an equilateral triangle, is intended
to alert the user to the presence of
uninsulated "dangerous voltage" within
the product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.

The exclamation point within an
equilateral triangle is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompanying
the product.

CAUTION

Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.

THE FCC REGULATION WARNING (for USA)

This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

Unauthorized changes or modification to this system can
void the user’s authority to operate this equipment.

  Notice regarding disposal (EU only)

When this “crossed-out wheeled bin” symbol is
displayed on the product, owner’s manual,
battery, or battery package, it signifies that when
you wish to dispose of this product, manual,
package or battery you must do so in an
approved manner. Do not discard this product,

manual, package or battery along with ordinary
household waste. Disposing in the correct
manner will prevent harm to human health and

potential damage to the environment. Since the correct
method of disposal will depend on the applicable laws
and regulations in your locality, please contact your local
administrative body for details. If the battery contains
heavy metals in excess of the regulated amount, a
chemical symbol is displayed below the “crossed-out
wheeled bin” symbol on the battery or battery package.

* All product names and company names are the trademarks

or registered trademarks of their respective owners.

Содержание Valvetronix VT100

































Отзывы: