16
Using the VFS2 dual foot switch
f the optional VFS2 dual foot switch (sold separately*) is connected to the rear panel
FOOT SW jack, you can use it to switch programs or turn effect bypass on/off.
S
WITCHING
THE
CHANNEL
PROGRAM
(
SWITCH
1)
Each time you press the VFS2’s left switch (switch 1), you’ll alternate between CH1 and
CH2.
NOTE:
Switch 1 has the same function as the channel select switch on the top panel. If
you press switch 1 in Preset mode or Manual mode, you’ll change over to Channel Select
mode. Also, pressing switch 1 during the process of storing a program (the CH1 or CH2
LED is blinking) will change the store-destination.
T
URNING
EFFECT
BYPASS
ON
/
OFF
(
SWITCH
2)
Hold down the top panel BYPASS switch and press the VFS2’s right switch (switch 2).
This assigns the function of switch 2 as “bypass on/off.” Now when you press switch 2,
effect bypass will alternately be turned on/off.
HINT:
The amp will remember the switch 2 assignment. This setting is remembered even
if you switch modes or programs, or turn off the power.
S
WITCHING
TO
M
ANUAL
MODE
(
SWITCH
2)
Hold down the top panel MANUAL switch and press the VFS2’s right switch (switch 2).
This assigns the function of switch 2 as “Manual mode.” Now when you press switch 2,
the amp will switch to Manual mode.
HINT:
The amp will remember the switch 2 assignment. This setting is remembered even
if you switch modes or programs, or turn off the power.
I
VFS2 left switch (switch 1):
Switches channel programs
VFS2 right switch (switch 2): Switches bypass on/off, or turn
Manual mode on
