Vox StompLab IB, Руководство пользователя, Страница: 8 / 68

8
In Program select mode, the Tuner
#
LED and

LED will light
up and the EDIT LED will turn off.
When in Edit mode, the EDIT LED will light up and it will
turn off when the EDIT button is pressed to switch to Program
select mode.
2. Select a genre with the CATEGORY selector and press the
Program UP or Program DOWN pedal to select the program.
The program/value display shows the number of the program
that you selected.
3. Adjust the master volume as necessary.
)
Page 11 “Setting the type of device that you’ll be connecting
to the OUTPUT/PHONES jack and master volume - [GBL]
(GLOBAL)”.
Bypass and Mute
Bypass (which turns off all effects including noise reduction)
and Mute (which mutes the StompLabs output) are convenient
functions to use while you’re adjusting your bass amp, tuning
during a live performance, or switching basses. Here’s how to
use Bypass or Mute.
Bypassing the StompLab
Simultaneously press the Program UP and Program DOWN
pedals; all effects will be bypassed. At this time, the program/
value display will indicate “ – – ”.
Muting the StompLab
Simultaneously press and hold down the Program UP and Program
DOWN pedals for about one second and the output will be muted.
At this time, the program/value display will indicate “ _ _ ”.
When bypassed or muted, the Auto Chromatic Tuner will be
active. To cancel the bypass or mute function, press the Program
UP or Program DOWN pedal (this will not change the program).
Tuner
The StompLab has a built-in Auto Chromatic Tuner.
You can calibrate the reference pitch (the note “A”) of the tuner
in a range of 438Hz–445Hz.
Tuning procedure
1. The Auto Chromatic Tuner will be activated when the StompLab
is bypassed or muted.
If you want to tune silently, such as during a live
performance, simply mute the StompLab.
2. Play a note on your bass and the program/value display will
indicate the name of the closest note.
Note names are indicated as follows.
C C# D D# E F F# G G# A A# B Note name
Display
3. If your bass is sharp (pitch too high), the Tuner
#
LED will light
up. If your bass is flat (pitch too low), the Tuner

LED will light
up. In either case, the brightness of the LEDs will indicate how