Vox Technologies EM-350A, Руководство пользователя, Страница: 51 / 66

AWARD BIOS SETUP
EM-350 / 45
the new password by re-typing it and pressing <Enter> again. When you are done
the screen automatically reverts to the main screen. Remember that when you use
this feature, the “ Security Option” line in BIOS FEATURES SETUP will determine when
entering the password will be required.
To disable the password, press the <Enter> key instead of entering a new password
when the “ Enter Password” in the dialog box appears. A message will appear
confirming that the password is disabled.
If you have set both supervisor and user passwords, only the supervisor password will
allow you to enter the BIOS SETUP PROGRAM.
Note : If you forget your password, the only way to solve this problem is to discharge
the CMOS memory by turning the power off and placing a shunt on the S1 (open
pad) for 5 seconds, then removing the shunt.
3.12 IDE HDD A
UTO
D
ETECTION
If your system has an IDE hard drive, you can use this utility to detect its parameters
and enter them into the Standard CMOS Setup automatically.
If the auto-detected parameters displayed do not match the ones that should used for
your hard drive, do not accept them. Press the <N> key to reject the values and
enter the correct ones manually on the Standard CMOS Setup screen.
Note : If you are setting up a new hard disk drive (with nothing on it) that supports LBA
mode, more than one line will appear in the parameter box, choose the line that
lists LBA for an LBA drive.
Do not choose Large or Normal if the hard disk drive is already fully formatted when
you install it, choose the mode “ HDD Low Level Format” to format it.
3.13 S
AVE
& E
XIT
S
ETUP
Select this option and press the <Enter> key to save the new setting information in the
CMOS memory and continue with the booting process.
3.14 E
XIT
W
ITHOUT
S
AVING
Select this option and press the <Enter > key to exit the Setup Utility without recording