VOX electronics TM-1056, Руководство по эксплуатации

Страница: 7 / 95

6
Note: never use boiling liquids or run the appliance empty.
4. Put the lid on the jar. Be sure the measuring cup is in place.
5. Plug the power cord into a standard wall outlet.
6. Choose to the appropriate speed setting for your task.
(Please stir food at the highest speed,
not at low speed) .
7. For quick or delicate blending tasks, press the key to
“P2” position and hold for a few seconds and
then release,
the key will reset to “OFF” position automatically. Operate several times until the
consistence you want is obtained
8. If you want to add ingredients while the blender is working, remove the measuring cup and place
through the lid opening.
（
See Fig.7
）
9. When crushing ice or hard food, keep one hand firmly on the lid.
10. When the consistence you desire is obtained, press the key to
“OFF” position.
Note: 1) For each use, the consecutive operation time should not exceed 2 minutes. At least 10
minutes rest time must be maintained between two continuous cycles, let the unit cool to room
temperature before performing next operation cycle.
2) If you want to stop the machine during operation, press the key to
“OFF” position anytime.
Important operating tips
·
For best circulation of food that are to be blended with some liquid, pour the liquid into the jar first,
then add solids.
·
Some of the tasks that cannot be performed efficiently with a blender are: beating egg whites,
whipping cream, mashing potatoes, grinding meat, mixing dough, extracting juice from fruit and
vegetable
·
The following items should never be placed in the unit as they may cause damage: bones, large
pieces of solid, frozen food, or tough foods such as turnips.
·
To crush ice, add up to 6 ice cubes. If more ice is needed, remove the cup and add cubes one by
one through the lid opening.
CARE AND CLEANING
This product contains no user serviceable parts. Refer service to qualified service personnel.
1. Before cleaning, unplug the blender.
2. Always wash im
mediately after use for easier cleaning. Don’t let food dry on the jar assembly as
this will make cleaning difficult.
3. Pour a little warm soapy water into the jar and turn the knob to P position for a few seconds. And
then empty the jar.
4. Dismantle all detachable parts. Lift the jar assembly off the motor unit. To detach the blade
assembly by turning it clockwise from the jar base bottom, and remove the seal ring 2 and blade
assembly (see fig.8). In addition, detach the jar cover seal ring 1 from the jar cover.