EN - 9 -
• Before using your fridge freezer, wipe all parts with a solution of warm water and a
teaspoon of sodium bicarbonate. Then, rinse with clean water and dry. Return all parts
to the fridge freezer after cleaning.
• Install the two plastic distance guides (the parts on the black vanes
-condenser- at the rear) by turning it 90° (as shown in the figure) to
prevent the condenser from touching the wall.
• The distance between the appliance and back wall must be a maximum
of 75 mm.
Before Using your Fridge
• When using your fridge for the first time, or after transportation, keep it in
an upright position for at least 3 hours before plugging into the mains. This
allows efficient operation and prevents damage to the compressor.
• Your fridge may have a smell when it is operated for the first time. This is
normal and the smell will fade away when your fridge starts to cool.
USING THE APPLIANCE
PART - 2.
Thermostat Setting
The thermostat automatically regulates the
temperature inside the refrigerator and freezer
compartments. Cooler temperatures can be
obtained by rotating the knob to higher numbers,
1 to 5.
Important note:
Do not try to rotate the
knob beyond position 1, it will stop your
appliance from working.
Thermostat Settings
• Set the knob to a low/medium position, up to 3, for short-term storage of food in the
appliance.
• Set the knob to a medium position, 3 or 4, for long-term storage of food in the appliance.
• Set the knob to 5 position for freezing the fresh food. The appliance will run for colder
temperatures.
If Super Switch is available:
• Normally set this switch to ‘0’ position. Except
when the ambient temperature is low like in
winter. (ie.below 16°C) or when the freezer
temperature needs to be maintained lower. In
that case, turn the switch to ‘1’ position ON.
• To set super switch ON that is on the thermostat
box, press the switch down to ‘1’ position. The
switch will lit.
• When the freezer compartment is cooled down to sufficient temperature, or the weather
gets hot, turn the super switch off to save electrical consumption.
• When you first switch on the appliance, for starting a suitable cooling, the appliance
should work 24 hours continuously until it cools down to sufficient temperature.
Lamp cover
Thermostat knob
Super switch
(In some models)
Содержание KS1430
