VOX electronics 8606107345574, Руководство по эксплуатации

Страница: 35 / 126

8
Electrical connection of your hob
. Before proceeding with the electrical connection, verify that the current
carrying capacity of the system and the socket is adequate for the maximum
power rating of the hob.
· Electrical installation of the residence and the electrical current plug in
use must be earthed and conform with safety regulations.
· If there is no dedicated hob circuit and fused switch, they must be installed
by a qualified electrician before the hob is connected.
· Fused switch must be easily accessible once the hob has been installed.
· Do not use adaptors, multiple sockets and/or extension leads.
· This appliance conforms with the requirements ofthe following EEC
Directives:
1. Vitroceramic hob EEC/73/23 and 93/68, EEC/89/336 relating to
radio interference,
2. EEC/89/109 relating to contact with foods.
· A circuit breaker with a contact opening of at least 3 mm, rated 20 A and
delayed functioning type must be installed inside the supply circuit.
IMPORTANT : The following diameters of supply cable must be used at least in case
of 1 phase connection :
Rated power on
nameplate:
5000W - 8700W
at 220V:
> 8700W at 220V:
> 9100W at 230V:
> 9500W at 240V:
3 x 2.5 mm
3 x 4.0 mm
3 x 4.0 mm
2
2
2
2
2
2
3 x 4.0 mm
3 x 2.5 mm
3 x 2.5 mm
5000W - 9100W
at 230V:
5000W - 9500W
at 240V:
Rated power on
nameplate: Diameter of supply
cable: Diameter of supply
cable:
Cooking hobs not provided with supply cord.
25 A and