VOX electronics 8606106512663, Руководство по эксплуатации

Страница: 13 / 138

The plastic hose that is fixed onto the gas entrance of appliance with a pipe collar, must
be used while connecting for Butane-Propane gas. Connect your appliance with a short
and impervious hose as much as possible to the gas resource. The hose’s permitted
maximum lenght is 1.5m. The hose that brings gas to the appliance must be changed (1)
once a year for your security.
The points that must be paid attention while connecting the hose;
No parts of the hose must not touch to any place that has heat more than 50
0
C.
The lenght of hose must not exceed 1.5m.
The hose must not be ruptured, be tightened or be folded.
The hose must not touch to the sharp corners, moving things, must not be defective.
The hose must be controlled from end before mounting, it must be observed whether
there is any production defect.
As gas is turned on, all connection parts and hose must be controlled with prepared much
bubbly water at first after the gas entrance connections are completely finished. Never
use a lighter, match etc. while making this process.
The tightening pipe collars must clear of rust.
The expirence dates must not have exceeded over 5 years.
As affixing an end of hose to the detector, other end to the gas entrance adaptor of oven
tightly, hold it with a sheet iron pipe collar and screwdriver very tightly. If no
connection is made with hose in limitation of conditions that were explained above, flexible
metal hose can be used. It is required to contact to the authorized service to be able to
connect appropriately at security standards on this condition and a technician must do this
connection.
Your oven is adjusted to operate by NG. If it is required to be operated by LPG gas, contact
to the nearest Authorized dealer. While gas is being connected for LPG gas, on the gas
entrance of appliance, hose connection apparate must be used and it must be connected
by a technician (Figure 6). The flexible hose must not touch the sharp places and there must
be no damage.
ATTENTION!!!
Surely do not use any match and lighter for control of gas leakage.
A
B
Figure 6
The gas inlet of this product is on the right side of the appliance. If connection
point needs to be moved to the left side of the appliance, you can request an
extension pipe from your authorized service.
90°C