VOV VHS-20CT, Инструкция по эксплуатации

Страница: 2 / 12

READ AND RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
GENERAL SAFETY
DO NOT COVER, RESTRICT AIR INLET/OUT OR USE TO DRY CLOTHES.
DO NOT USE WITHOUT FEET ATTACHED.
ONLY USE IN THE UPRIGHT POSITION ON A FLAT LEVEL SURFACE.
THE SURFACE OF THIS FAN HEATER IS NOT CLOSELY SUPERVISE ANY CHILDREN AND PETS
IN USING.
DO NOT USE FAN HEATER NEAR FLAMMABLE OR HEAT SENSITIVE ITEMS.
DO NOT POSITION IN POINT OF OR UNDER POWER SOCKETS, SHELVING OR OTHER
OBSTRUCTIONS TO AIRFLOW.
ELECTRICAL SAFETY
FOR INDOOR USE ONLY.
SWITCH OFF AND UNPLUG WHEN NOT IN USE.
DO NOT FULL THE HEATER ALONG THE CORD OR USE IF DAMAGED.
DO NOT USE HEATER IN HUMID OR WET ENVIROMENTS.
IF THE SUPPLY CORD IS DAMAGED IT MUST BE REPLACED BY AN ELECTRICAL OR
SIMILARLY QUALIFIED PERSON TO AVOID HAZARD.
ASSEMBLY
Carefully turn the radiator on it’s side to fit the feet.
Position each feet as shown in fig 1. and secure using the self tapping screws provided.
Two screws are required for each feet and this unit must not be used without the feel firmly attached.
TO USE
Turn the heater to the “OFF” position before plugging in.
The operating temperature is selected by a combination of the heater switches and thermostat. The hottest
setting will be when the heater switches are both on and the thermostat is turned to “Maximum”.
To determine the correct working temperature for your conditions, turn the heater to “High” and the
thermostat to “Maximum” when the room has reached the required temperature turn the thermostat slowly
to the left until the temperature is off. The temperature will now be kept constant.
If you want to lower the operating temperature select the one of the heater switch only and repeat the above
procedure.
The heater is fitted with an automatic cutout in the event that it overheats. If is this activates, turn the heater
to the off position and unplug. Allow the heater to cool and remove anything restricting the airflow before
using the heater again. If the automatic cut out operates repeatedly contact a quantified electrician for
advice.
NOTES
For maximum benefit, closing windows and door when the heater is open
Do not cover the ventilation holes as this will cause overheating and will activate the cut out.