9
turns on.
Under power-on mode, press “TIMER” to setup power-off timer. Timer indicator
turns on.
Dehumidifying mode
Press “MODE” to select dehumidifying mode, dehumidifying mode indicator turns
on .
Under dehumidifying mode, sleeping function cannot be setup, and fan speed is low.
Sleeping mode
Press key SLEEP
enter into sleeping mode, default value of fan speed is low.
When sleeping mode turns on , under cooling mode, the first one hour later, setting
temperature will go up 1
, the second one hour later, setting temperature will go
up another 1
, and then keep the same .
Sleeping mode is invalid under dehumidifying and fan mode. Under water full,
machine standby and mode conversion, sleeping mode will be cancelled .
Compressor protection
Three minutes later after power on / restart, compressor starts to run.
Water Drainage
This machine with auto-water-evaporating system. Condensed-water cycle to cool
down the condenser, which will not only improve cooling efficiency, but also save
energy.
If inner water tank is full, WATER FULL indicator will flashed on the screen , machine
enter into standby mode, buzzer shouts , compressor stops and all keys is invalid till
machine recovers to be normal .
Pull out the plug to drain out water, power off the machine and restart it , the machine
will runs normally .
