--2--
How to set the operating modes:
The micro slide switches for adjustment of the operating modes are located at the inverter behind the control panel.
The functions of the ON/OFF control unit can only be used, if
microswitch 4
(Run Mode)
had been placed to position
Always On.
Microswitch 3
(Power Save) is used to
switch the Power Save Mode on or off (see operating manual
inverter).
In connection with the ON/OFFF control unit,
microswitch 2
(Power Save Time) has no function.
Microswitch 1
(Power Save Load) is used to set the thresholds for
operation in Power Save Mode between
25 W and 60 W (see operating manual inverter).
View: Display panel removed
Disposal of
the product
in the
household waste
is not
allowed.
The product
conforms to RoHS.
Thus, it complies
with the directives for Reduction of
Hazardous Substances in Electrical and
Electronic Equipment
.
Declaration of Conformity
According to the stipulations of the regulations 2006/95/EG, 2004/108/EG, 95/54/EG this product corresponds to the
following standards or standardized documents:
EN60950; EN 55014 ; EN55022 B; DIN14685; DIN40839-1; EN61000-4-2; EN61000-4-3; EN 61000-4-4
Subject to misprints, errors and technical modification without notice.
All rights reserved, particularly the right of reproduction. Copyright
VOTRONIC 04/14.
Made in Germany by VOTRONIC Electronic-Systeme GmbH & Co. KG, Johann-Friedrich-Diehm-Str. 10, 36341 Lauterbach/GERMANY
Phone: +49 (0)6641/91173-0 Fax: +49 (0)6641/91173-20 E-Mail: [email protected] Internet: www.votronic.de
Technical Data:
Nominal Voltage (DC):
12 V / 24 V
Control Input, max. Voltage:
32 V
Control Input (ON Recognition):
from 10 V to 32 V
Control Input (OFF Recognition):
less than 1.0 V
Dimensions (mm):
75x47x20
Weight:
40 g
Ambient Conditions, Humidity of Air:
max. 95 % RH, no condensation
Delivery Scope:
Available Accessories:
ON/OFF Control Unit
- Connection Cable, 5 m Length, as Extension, Order No. 2005
Connection Cable, 6-Poles, Length 30 cm
