Vorwerk Thermomix Friend, Руководство пользователя

Страница: 23 / 32

Thermomix Friend® 23
9 Troubleshooting
Fault Display If there is a fault, the following symbols will appear on the display.
The cooking process cannot start as the mixing bowl is missing.
– Place the mixing bowl in the Thermomix Friend®.
The mixing bowl detector is not configured correctly.
– Configure the mixing bowl detector for your mixing bowl, see
Adjusting the Mixing Bowl Detector [
}
15] .
The cooking process was stopped as the mixing knife is blocked.
The pieces of food in the mixing bowl may be too large.
– Chop up the food, see Rectifying a Block on the Mixing Knife
[ } 25] .
Fault codes on the display
The code on the display gives information about the fault and how it can be rectified.
You acknowledge the fault by pressing the selector. For instructions on how to
switch off and restart your Thermomix Friend® if required, see
Switching on and off
[ } 18] .
Tips
If faults repeatedly occur, check whether the firmware on your device is up to date
and run a firmware update if necessary (see
Firmware Update [
}
17] ).
If a fault code is displayed repeatedly despite the current firmware, contact customer
service (see
Customer Care United Kingdom [ } 26] ).
Fault code Meaning Recommended action
23 Problem with the mixing
bowl Clean the contact pins on the mixing bowl, put the mixing bowl back in
position, and restart the device.
*)
25 Motor overloaded Check if the motor is blocked and reduce the load if necessary.
*)
29 Motor overloaded/
overheating Confirm the error message by pressing the selector and wait until the motor
has cooled down. Restart the device.
*)
33 Hardware problem Confirm the error message by pressing the selector and restart the device.
*)
37 Hardware problem Confirm the error message by pressing the selector and restart the device.
*)
38 Hardware problem Confirm the error message by pressing the selector and restart the device.
*)
52 Problem with the mixing
bowl If you have put very cold or frozen food into the mixing bowl, or if the mixing
bowl has been stored in the refrigerator and placed directly onto the
appliance, we recommend emptying the mixing bowl and rinsing it with
warm water. You can then refill the mixing bowl and continue with your
recipe. To prevent this from happening again, we recommend that you
process very cold or frozen ingredients quickly, and do not allow the mixing