16
INSTALLATION OPERATIONS AND MAINTENANCE MANUAL - RXC/Hi SERIES
5. AVAILABLE ACCESSORIES
Return side ePM
10
50% (G4) air pre-filter
Made of galvanized steel sheet frame and undulated filter media, 48mm thickness, in white synthetic material, contained by
two welded galvanized nets. The filter media has a low pressure drop and it may be installed as pre-filter in combination with
the ePM
10
60% (M5), ePM
1
55% (F7) or ePM
1
80% (F9) filters, located on the room air return side.
Supply side ePM
10
50% (G4) air pre-filter
Made of galvanized steel sheet frame and undulated filter media, 48mm thickness, in white synthetic material, contained by
two welded galvanized nets. The filter media has a low pressure drop and it may be installed as pre-filter in combination with
ePM
1
55% (F7) or ePM
1
80% (F9) filters, located on the room air supply side.
Return side ePM
10
60% (M5) air filter
Built with a galvanized sheet metal frame and a 48 mm thick pleated filtering sieve, in white fiberglass, contained by two
welded galvanized nets. The filter media has an ePM
10
60% (M5) filtering degree, according to ISO 16890 and has a large
filtering surface area that guarantees long operating life and less frequent replacements.
Supply side ePM
10
60% (M5) air filter
Built with a galvanized sheet metal frame and a 48 mm thick pleated filtering sieve, in white fiberglass, contained by two
welded galvanized nets. The filter media has an ePM
10
60% (M5) filtering degree, according to ISO 16890 and has a large
filtering surface area that guarantees long operating life and less frequent replacements.
Return side eMP
1
55% (F7) air filter
Built with a galvanized sheet metal frame and a 48 mm thick pleated filtering sieve, in white fiberglass, contained by two
welded galvanized nets. The filter media has an ePM
1
55% (F7) filtering degree, according to ISO 16890 and has a large
filtering surface area that guarantees long operating life and less frequent replacements.
Supply side eMP
1
55% (F7) air filter
Built with a galvanized sheet metal frame and a 48 mm thick pleated filtering sieve, in white fiberglass, contained by two
welded galvanized nets. The filter media has an ePM
1
55% (F7) filtering degree, according to ISO 16890 and has a large
filtering surface area that guarantees long operating life and less frequent replacements.
Return side eEPM
1
80% (F9) air filter
Built with a galvanized sheet metal frame and a 48 mm thick pleated filtering sieve, in white fiberglass, contained by two welded
galvanized nets. The filter media has an ePM
1
80% (F9) filtering degree, according to ISO 16890 and has a large filtering surface area
that guarantees long operating life and less frequent replacements.
Supply side eEPM
1
80% (F9) air filter
Built with a galvanized sheet metal frame and a 48 mm thick pleated filtering sieve, in white fiberglass, contained by two welded
galvanized nets. The filter media has an ePM
1
80% (F9) filtering degree, according to ISO 16890 and has a large filtering surface area
that guarantees long operating life and less frequent replacements.
Heat recovery hot gas defrost kit
The system consists of a specific circuit with a direct expansion heat exchanger with hot gas, acting as condenser, located
upstream the heat recovery unit on the room return air side. The hot gas allows to increase the air temperature in exhaust,
thus allowing the melting of ice which might deposit on the plate heat recovery unit during severe operating conditions.
