Vortice CB LCD W, Инструкция пользователя

Страница: 16 / 76

16
ENGLISH
4. Installation
- The circuit support (fig.3) allows for the application of different plaques as shown
in the following table:
- Insert the tube with the cables (fig.5,6).
- Make the connection according to the wiring diagrams (fig.4).
- Make fixing holes for the box as in (fig.7,8,9).
- Fasten the plaque support to the box by means of the supplied screws (fig. 10).
- Affix the plaque by pressing it into the support (fig.11).
5. Maintenance and cleaning
Fig. 12
Cleaning and maintenance operations must be carried out with the power supply
disconnected or switched off.
USABLE
PLAQUES
4 DENTIN POSITION
TO BE BREAKED
(fig.4)
BTicino Light,
Light Tech,
Living
X
Vimar Plana,
Eikon
X
Vimar Idea,
Rondò
Y
Gewiss
Playbus,
Playbus Young
X
Ave Sistema 45,
Banquise, Yes,
Noir, Blanc
NONE
VORTICE
X
CAUTION!:
All equipment repairs must be carried out by qualified personnel. Improper
repairs can put the user in serious danger. If your equipment needs repair,
contact service assistance.
!
CAUTION!:
before undertaking any maintenance operations, make sure that equipment
is not and cannot accidentally be powered electrically. Therefore, cut off the
power supply for any maintenance or cleaning.
!