Vortice 5571.084.160, Инструкция пользователя

Страница: 49 / 56

49
Lucky2 - Setting
Detailed description
The Lucky2 programmable circuit board lets you set
enabling of the voltage on the fan outlets and on the
remote contact.
The pressure switch is used to check the inlet water
pressure. If enabled, the Lucky2 programmable circuit
board signals an alarm on the control unit if there is a
lack of water.
To use the fans via the on-board outlet, you will have to
enable their operation. Set the setting to "NO" if no fans
are present.
Remote contact enabling allows remote control of the
misting unit, permitting it to work only when the contact
is sent to the unit itself. To make this connection, beyond
the single setting, you need to operate directly on the
electrical panel of the machine, an operation which is
only authorised for technicians recognised by the
manufacturer.
!
The data shown may differ from the information
that appears on the display in your possession as it
may bear descriptions in another language or
values in another unit of measurement.
ENGLISH
Enable
Fan:NO
Enable
Prex:YES
Enable pressure
switch
Enable fans
Enable
Rem.:NO
Enable remote