Vortice 12214, Инструкция пользователя

Страница: 52 / 148

52
"Alarms" page
Access the "Alarms" page only if the machine detects one of the problems detailed below:
• Pre-alarm: Filters checking
without blocking the machine;
• Alarm: Filters replacing without blocking the machine;
• Alarm: No Frost - Wait one hour occurs with the machine lock;
• Alarm: Ext probe damaged without blocking the machine (No Frost, By-pass: not
enabled);
• Alarm: Int probe damaged without blocking the machine (“By-pass” not enabled);
• Alarm: Exh probe damaged
without blocking the machine (No Frost not enabled);
Alarm with machine lock:
On the "HOME" page, are alternated shown the words "Alarm!"
And "Block!".
Alarm without locking the machine: On the "HOME" page, is shown the word "Alarm!".
In case of alarms: From the "Main Menu" page, choose the "Alarms" row and press the [

] key.
A new descriptive page shows the specific alarm text and troubleshooting instructions.
Pre-alarm: “Filters checking”
After the preset time has elapsed, "Alarm" appears in "HOME" and the note "Check clean filter" in the "Alarms"
page.To replace the filters, follow the instructions in "Maintenance and Cleaning".
Pressing the [

] key will display:
ENGLISH
Warning:
After 2 minutes with no keys being pressed, the display returns to the "Home" page without ! saving
any changes.
MAIN MENU
USE MENU
ALARM
SETUP
INFO
[
▲
]
[
▲
]
[
9 9
]
Alarm
Filters
Filters
Check
clean
filter
[
▲
]
[
▲
]
SI
[
9
]
NO
9
] [
9 9
]
!!