VORTEX FACTORY: Via E. Fermi, 5 – 27040 Campospinoso (PV)– ITALY – Tel. +39 0385 765200
VORTEX FACTORY: Via E. Fermi, 5 – 27040 Campospinoso (PV)– ITALY – Tel. +39 0385 765200
OTK KART GROUP srl
Via dei Soprini, 16 – 25080 PREVALLE (Brescia) ITALY-‐Tel. +39 030 6804601 – Fax +39 030 6804698
Rev. 30/09/15
6
10mm Fixed Wrench
Mount the coil’s bracket plate with 6mm nuts
and washers supplied (photo1).
The fixing of the silent block on the opposite
side is made with the only 6mm nuts (photo 2).
Again, pay attention to the assembly of the
silent block that supports the ground cable.
The ground cable must be between the washer
and the crankcase, as per Point
5
.
7
8mm Fixed Wrench/3mm Allen Wrench
Fix the coil on the bracket with the bottom
head screw, washer and 5mm self-‐locking nut
provided.
8
Plug the two ends from the ignition to the coil.
Green cable goes in green plug.
1
2
