VorTek SonoPro Professional S36 Series, Инструкция по эксплуатации

Страница: 70 / 108

Series S36 Instruction Manual Chapter 4 Serial Communications
800120 4-13
BACnet MS/TP Communications
Refer to the document, Start-up Guide – ProtoCessor FPC-ED2,
for all information relating to the ProtoCessor and how to
configure the ProtoCessor to communicate via BACnet. This
document can be found at www.vortekinst.com.
Applicable Flow Meter Models Only
The SonoPro® Professional Series Flow Meter utilizes an MSA
Safety ProtoCessor that provides a TTL to RS-485 and Ethernet
connection for BACnet MS/TP or BACnet/IP communication
depending on the model code configuration ordered. The MSA
Safety ProtoCessor will leave the factory configured for the
communication protocol selected at the time of order. If later the
communication protocol needs to be changed (e.g., from BACnet
MS/TP to BACnet/IP), the procedure (Start-up Guide -
ProtoCessor FPC-ED2) to do so can be found at
www.vortekinst.com. The MSA Safety ProtoCessor comes
standard with BTL (BACnet Testing Laboratories) certification.
For a copy of the BTL certificate, see www.vortekinst.com.
The MSA Safety ProtoCessor can be seen in Figure 4-3.
1. Baud Rates
The baud rate settings available on the SonoPro® Professional
Series Flow Meters for BACnet communication are 9600
(Default), 19200, 38400, and 76800.