![background image](http://html1.mh-extra.com/html/vorsprung/frp0046/frp0046_user-manual_1050411017.webp)
17
Calibration Settings
To Adjust Concentration
Press the
MENU
button three times to
display
C2 45
(indicates concentration
of 30ml water with 4.5g milk formula).
Increase or decrease the concentration
however you prefer, for example if your
milk powder uses 6g powder for 30ml
water, press
+
to
6
, turn off the appliance,
the settings will save automatically.
Correcting Water Volume
Do not remove the milk bottle, pull out the mixing tank, press and hold the
START
button to display
C3 15
, then press the
MENU
button to display the number between
C1 100
-
110
.
Install the mixing tank, place the bottle, press the
START
button to pour out the first
water, enter the first weight into the screen and pour out the second water.
If the second is only different from the screen by
±0.4g
, the calibration is complete. If
the difference exceed
±0.5g
, enter the weight of grams on the screen and continue
the calibration. After the calibration is completed, turn off the appliance, the setting
will save automatically.
To Adjust the Amount of Powder
Do not put formula directly in the bottle,
pull out the mixing tank, press and hold
the
START
button to display
C3 15
, install
the mixing tank, put the clean and dry
bottle in place.
Press the
START
button to pour out
the first milk powder, enter the first
weight into the screen, and then pour
out the second milk powder. If the
second is different from the screen by
±0.4g
, then the calibration is complete.
If the difference exceeds
±0.5g
, enter
the weight of grams in the screen and
continue the calibration.
After the calibration is completed, turn
off the appliance, the setting will save
automatically.
The appliance’s factory setting is at a concentration ratio of 30ml with 4.5g
milk powder. This can be adjusted.