manualshive.com logo in svg

Vorsis VP8 Plus, Примечание к применению

Поделиться
Скачать
Vorsis VP8 Plus Скачать руководство пользователя страница 32

As before, to reset the custom-generated equalizations back to their 
starting points simply recall the last preset taken. 
 
 
GUI Lite Caveats 
 
While ‘GUI Lite’ can’t compete with ‘GUI Pro’ in terms of the ability to 
perform deep customization of our Factory presets, it can help 
customers with limited audio processing experience quickly achieve 
their desired sound without needing to learn the interactions of literally 
hundreds of controls.   
 
What  follows  is  an  overview  of  what  to  keep  in  mind  about  how  GUI 
Lite interacts with both the audio processor and the Pro version of the 
GUI. 
 

1.

 

GUI Lite can only modify virgin Factory presets. 

 

Why? GUI Lite relies on known starting points within the Factory 
presets before it can make modifications. The only presets that can 
be modified by GUI Lite are Factory presets. 
 
2.  Once a Factory preset has been modified by GUI Pro it 
cannot be modified using GUI Lite. 

 

Why?  If a Factory preset has been modified by GUI Pro it is no 
longer a ‘Factory’ preset and therefore it is not allowed to be 
modified using GUI Lite.  

 

3.

 

User-created presets, whether created by GUI Lite or GUI 
Pro cannot be touched again by GUI Lite. 

 

Why? User-created presets do not have reference starting points 
known to GUI Lite and therefore GUI Lite cannot modify such 
presets. 
 
4.

 

GUI Pro can customize presets created by GUI Lite 
although the reverse is not true. 

 

Why? GUI Pro has full control of all parameters regardless of how, 
where, and by whom they were created. GUI Lite does not have this 
capability. 
 

 

32

Содержание VP8 Plus











































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды