11
English
10
English
Place flat screwdriver against the angled section of the grill support
tab and press outward to allow the grill wire to be released from
the support tab.
Repeat on second and third grill support tabs.
To reinstall, align and replace grill wire ends into the support tabs.
Use the flat screwdriver to flex wire ends back into the support tabs.
1
2
3
GRILL REMOVAL
WARNING: To avoid risk of fire, electrical shock or injury to persons,
power off and unplug the air circulator before removing the grill.
TIP: To prevent scratching, gently cover the tip of a flat screwdriver with
a soft cloth.
BLADE REMOVAL
WARNING: To avoid risk of fire, electrical shock or injury to persons,
power off and unplug the air circulator before removing the blade.
BLADE CAP
CLEANING
1
2
3
Remove the blade cap by unscrewing the blade cap clockwise.
Next, remove the fan blade by pulling the blade straight out
from the shaft.
To reinstall, push the blade all the way on the shaft until it bottoms
out. The blade can only go on the shaft one way. Do not use
a hammer as this could result in bearing damage. Replace the
blade cap.
