7
Setup Wizard
Step 1 - Power up
1. Connect to your Internet Radio adapter and ensure the power LED is lighting up.
2. In use, it can be switched on or off by pressing
STANDBY/ON
. For initial use, it will ask you ‘
Setup
wizard
’.
Step 2 – Setup wizard
1. Continue above steps, press
to confirm ‘
YES
’, and then press
or
to your preferred ‘
hour
format
’, press
to confirm.
2. Press
to confirm to ‘
Update from Network
’.
3. Press
or
to your local ‘
timezone
’, and then press
to confirm.
4.
Press
or
to
your preferred ‘
Daylight saving
’
status, and then press
to confirm.
5.
Press
or
to your local ‘
Wlan region
’, and then press
to confirm.
6. Press
or
to your preferred ‘
SSID
’, press
to confirm. Radio will save it in memory.
Note
: Your radio
may find more than one network. Press
or
to your expected one, press
to confirm.
7. If your network is not configured to request a
password (WEP/WPA),
radio
will connect to
the network and display:
8. If a WEP/WPA key (password) is required,
radio will ask you to input the WEP/WPA code
and display the password entry screen as:
