10
Connecting to Wired Network
Step 1 – Choose LAN Setting
Note
: a. make sure LAN cable connecting to LAN socket already.
1. Press
MENU
, and then press
or
to ‘
Main Menu
’, press
to confirm.
2. Press
to <
System settings
>, press
to confirm.
3. Press
to <
Network
>, press
to confirm.
4. Press
or
to <
Manual settings
>, press
to confirm.
5. While cursor point to <
Wired
>, press
to confirm.
6. While cursor point to <
DHCP enable
>, press
to confirm.
The LAN setting is OK now!
Step 2 – Enter Internet Radio mode
1. Press
MENU
, then press
or
to ’
Main menu
’, press
to confirm, while cursor point to ‘
Internet
radio
’, press
to confirm. Or, press
MODE
repeatedly
until <
Internet Radio
> is showing up, stop
pressing.
or
Step3 – Access Network
Continue above steps, few seconds later, and it will say:
If it failed connect to network, please follow:
a. Check your Router, see it working normally or not.
b.
Check your LAN cable, make sure it hasn’t damaged,
c. See the port of cable which inserting LAN socket is connected well.
