DVR User Manual
35
4.8 P.T.Z Configuration
P.T.Z configuration includes two submenus: serial port and advanced settings.
Serial port settings are as follows:
Step 1: Enter into Menu
Setup
P.T.Z
Serial port tab. Refer to Fig 4-34:
Step 2: Select “Enable” and setup the value of address, baud rate and protocol according to the settings of the speed dome.
Step 3: Configure all channels with the same parameters by selecting the “All” box and then doing the relevant setup.
Fig 4-34 P.T.Z Configuration-Serial Port
Definitions and descriptions of network stream:
Parameter
Meaning
Address
The address of the PTZ device
Baud rate
Baud rate of the PTZ device. Range form: 110, 300, 600, 1200, 2400, 4800,
9600, 19200, 34800, 57600, 115200, 230400, 460800, 921600.
Protocol
Communication protocol of the PTZ device. Range from: NULL, PELCOP,
PELCOD, LILIN, MINKING, NEON, STAR, VIDO, DSCP, VISCA,
SAMSUNG, RM110, HY, N-control.
Simulative Cruise If enabled, no matter whether the PTZ device supports cruise or not, the presets
will cruise.
VOOK
Содержание VDT2704XE-L
Страница 1: ...VOOK HD SDI Digital video recorder VDT2704XE L VOOK ...
Страница 90: ...DVR User Manual 84 Software configuration Information view VOOK ...
Страница 96: ...DVR User Manual 90 VOOK ...
Страница 101: ...450011000361 A0 VOOK ...