VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
19
【
Set
】
Click
【
Start Tour
】
the trajectory of said no corresponding, click the
【
add Preset
】
and
【
delete Preset
point
】
,
【
Clear Tour
】
the cruise lines.
【
Start Tour
】
begin to track record, was registered date
【
end Tour
】，
thus set up from the corresponding track
circuit.
【
Left Limit
】
Began to limit scanning Settings, was registered date
【
right Limit
】
, thus set up corresponding limit
scanning.
【
Add Preset
】
Add presets point to the cruise lines.
【
Delete Preset
】
Cruise lines from deleting preset points.
【
Clear Tour
】
Remove the cruise line designated.
Note
: some equipment doesn't fully support all function, depending on the specific yuntai equipment and different.
【
Control
】
PTZ Control
【
Tour Scan
】
Point between cruise control.
【
Pattern Scan
】
Track patrol control.
【
PTZ Reset
】
Remove all Settings, original reset to the original state.
【
Limit Scan
】
Yuntai boundary scan control around.
【
Auto Pan
】
Remove the cruise line designated
Note
:
some equipment doesn't fully support all function, depending on the specific yuntai equipment and different.
VOOK
DIGITAL RECORDING
EVD042, EVD 082 & EVD162 Version 2.05
20
3.9 Alarm control
【
Set Alarm
】
Selection need protection channel, click confirm corresponding channel after in protection status
【
Clear Alarm
】
Remove protection condition, not alarm input to react
【
Alarm Output
】
Open the corresponding alarm output
【
All
】
Can choose all the channels
3.10 Display Adjust
(1)
Video
【
Video Effect
】
Optional: standard, downy, sharp, custom.
【
Default
】
Restoring default effect, for custom video effects, copy standard effect parameters.
Through the slider fluctuation sliding, respectively adjustable brightness, contrast and saturation, tonal, etc.
(2)Monitor
