VonShef.com
CLEANING & MAINTENANCE
WARNING! Never immerse the Kettle or POWER BASE (10) in water or any other liquid to clean.
•
Wipe the MAIN BODY (4) using a damp cloth and mild detergent.
CAUTION: To prevent the loss of the surface gloss, do not use abrasive cleaners to clean the MAIN BODY
(4).
•
To clean the filter (located at the SPOUT (3) base), remove by unclipping and wash with warm soapy
water. Dry thoroughly and replace.
•
When not in use, coil the power cord under the POWER BASE (10) to store.
Your Kettle should be periodically descaled as the mineral deposits in tap water may form scale on the bottom
of the appliance, causing it to operate less efficiency. Use commercially available descaler and follow the
instructions on the packaging.
Alternatively, follow the instructions below using white vinegar.
•
Fill the Kettle with
3 cups
of white vinegar and add just enough water to cover the bottom of the Kettle
completely.
•
Leave the solution in the Kettle overnight.
•
Discard the mixture and fill with clean, cold water.
•
Boil and the discard. Repeat several times until the odour of vinegar has been flushed away.
•
Any stains remaining inside the SPOUT (3) can be removed by rubbing with a damp cloth.
CAUTION: Before carrying out cleaning or maintenance,
disconnect the appliance from the mains.
BOIL-DRY PROTECTION
REMOVAL OF MINERAL DEPOSITS
In the event that you accidentally operate the Kettle to operate without water inside, the boil-dry protection
will automatically switch the Kettle off.
Should this occur, allow the Kettle to cool before refilling with clean, cold water and re-boiling.
