VonShef.com
BEFORE FIRST USE
Before using this appliance for the first time, please ensure you complete the following
steps:
•
Carefully unpack the 1.7L Variable Temperature
Kettle and remove all packaging materials
including any stickers or labels.
•
Wipe the outer surface of the Kettle with a
damp cloth or sponge. Wipe dry with a soft dry
cloth.
•
Press the LID RELEASE BUTTON (2) to open the
LID (1) and fill up to the maximum marker (1.7L)
with clean, cold water.
CAUTION: Do not overfill the Kettle as water
may be ejected through the SPOUT (3).
•
Place the Kettle firmly onto the POWER BASE,
plug into the mains and press the ON/OFF
BUTTON (7).
Allow the Kettle to boil at the preset
temperature, then discard the water. Refill and
repeat a second time.
WARNING! Take extra care when discarding the
boiled water. Allow to cool for several minutes
before doing so.
CONTROLS
ON/OFF BUTTON (7)
Press the ON/OFF BUTTON (7) to begin boiling to
100°c.
The WATER GAUGE (9) will illuminate RED throughout
the heating process.
MAX
1.7L
1.5L
1.0L
0.5L
MIN
MAX
1.7L
1.5L
1.0L
0.5L
MIN
MAX
1.7L
1.5L
1.0L
0.5L
MIN
MAX
1.7L
1.5L
1.0L
0.5L
MIN
MAX
1.7L
1.5L
1.0L
0.5L
MIN
MAX
1.7L
1.5L
1.0L
0.5L
MIN
MAX
1.7L
1.5L
1.0L
0.5L
MIN
50 70 80 90
100°c
°c
50 70 80 90
100°c
°c
50 70 80 90
100°c
°c
7
6
5
VARIABLE TEMPERATURE CONTROL (6)
To set a temperature, press the TEMPERATURE
CONTROL BUTTON (6) to cycle through the various
temperature settings.
Each press of the TEMPERATURE CONTROL BUTTON
(6) will cycle through the temperature modes from
50°c - 90°c.
Once the desired temperature is selected, press the
ON/OFF BUTTON (7) to begin boiling.
NOTE The WATER GAUGE (9) will illuminate
different colours representative of the
temperature selected.
50°c GREEN illumination
70°c BLUE
illumination
80°c PURPLE illumination
90°c YELLOW illumination
