www
.VonShef.
com
OPERATION
IMPORTANT: For your safety, the Ultra Blender
is fitted with an interlocking safety switch. All
components must be correctly assembled and
fitted to the MOTOR UNIT in order for the
blending function to operate.
CAUTION: Ensure the MOTOR UNIT is
disconnected from the mains before attaching
the BLENDING JAR/BLADE UNIT to prevent
accidental starting.
•
Invert the assembled BLENDING JAR/BLADE
UNIT and align the tabs with the small openings
on the MOTOR UNIT.
•
Connect the appliance to a suitable mains
socket to begin blending
•
Once aligned, turn the assembled BLENDING
JAR/BLADE UNIT clockwise to lock into place.
CAUTION: Do not operate continuously for
more than
1 minute
at a time in order to avoid
the appliance overheating. If more blending
is required, allow the appliance to rest before
blending again.
NOTE: For ‘pulse-like’ blending, instead of
locking into place, firmly push and hold down
the BLENDING JAR when placed onto the
MOTOR UNIT.
•
Once you are happy with the consistency of
the ingredients, unlock the BLENDING JAR/
BLADE UNIT from the MOTOR UNIT by twisting
anticlockwise to release.
•
Disconnect the MOTOR UNIT from the mains
and allow to cool.
•
Invert the BLENDING JAR and unscrew the
BLADE UNIT from the top.
NOTE: We recommend rinsing the BLADE
UNIT immediately after removing it from the
BLENDING JAR. Leaving ingredients to dry on
the blades will make the blades more difficult
to clean.
•
Replace the BLADE UNIT with the SPILL-PROOF
LID or SIP & SEAL LID. Ensure the LID is tightly
screwed on top.
•
The BLENDING JAR can be placed in the
refrigerator for later consumption (time scale
for consumption will depend on the ingredients
chosen).
