background image

Specifications

Specifications subject to change without notice.

Maximum Distance*

2,500 feet

Bandwidth

20 Hz to 20 kHz

Impedance

600 ohms, balanced

Isolation

500 V

Nominal Level

1.0 volts

Insertion Loss

1 dB

Common Mode Rejection

Greater than 40 dB

Unshielded Twisted Pair

Maximum capacitance: 20 pf/foot

Cabling Specifications

Impedance: 100 ohms @ 1 MHz

(24 gauge or lower solid

Attenuation: 6.6 dB/1000 ft. @ 1 MHz

copper)

Cat 3, Cat 5, Cat 5e, Cat 6, Cat 7 compatible

Connectors

One (2) female 1/8” mini to one (1) RJ45

RJ45 Pinout

Channel 1 (R): 1 & 2, pair 2
Channel 2 (L): 3 & 6, pair 3

Temperature

Operating: 32 to 131 F (0 to 55 C)
Storage: -4 to 185 F (-20 to 85 C)
Humidity: up to 95%

Enclosure

Font: standard decora-style wallplate
Rear: metal

Dimensions

4.0” x 1.4” x 1.7”

Weight

0.2 lbs (3.2 oz.)

Ordering Information

AVO-A2MINI-WP-F

: single AVO-A2MINI-WP-F balun

in bulk packaging

Warranty

2 years

*

Distances and picture quality may be affected by cable grade, cable quality, source and
destination equipment, RF and electrical interference, and cable patches. Intelix specifications are
based on straight-through cabling with standard-grade Cat 5.

Contact Information

Intelix

2222 Pleasant View Road
Middleton, WI  53562

Toll-free: 866-4-MATMIX
Phone: 608-831-0880
Fax: 608-831-1833

www.intelix.com

Intelix  AVO-A2-MINI-WP-F  Stereo Audio Balun

Installation Manual

Installation Manual

Installation Manual

Installation Manual

Installation Manual

The Intelix AVO-A2MINI-WP-F wallplate balun transmits ste-
reo analog audio via standard structured cabling, such as Cat 5.
Used in pairs or with a rack-mountable Intelix AVO-A2 balun,
the AVO-A2MINI-WP-F features an 1/8” mini (typical head-
phone) jack and transmits analog audio in either direction up to
2,500 feet. The AVO-A2MINI-WP-F is ideal for transmitting
computer and .mp3 player audio.

The Intelix 

Avo

Cat

 Series of baluns is the ideal solution for sending audio and

video over structured cabling. 

When signal quality matters, choose Intelix.

To install an AVO-A2MINI-WP-F balun, perform the following steps:

1. Turn off power and disconnect the audio equipment by following the manufacturer’s

instructions.

2. Make certain that outlets and cross connects to which you will connect the AVO-

A2MINI-WP-F are configured properly and labeled appropriately to identify the
circuit.

3. Verify the desired twisted pairs are not being used for other LAN or telephony

equipment.

4. Connect the RCA outputs from the source equipment to the AVO-A2MINI-

WP-F. Connect the RCA inputs from the receive input to a second AVO-A2MINI-
WP-F or another compatible Intelix balun, such as the AVO-A2-F.

5. Connect the two baluns with a structured cable with RJ45 connectors, such as

Cat 5. Verify the cable’s pinout conforms to EIA/TIA 568A or 568B pattern
standards.

6. Power on the source and destination equipment and test for correct operation.

Installation

Caution:

Do not attempt to disassemble or alter the balun housing. There are
no user-serviceable parts inside the AVO-A2MINI-WP-F. Modifying
the unit will void your warranty.

Caution:

Do not mount the balun over equipment ventilation openings. Covering the
openings may cause the equipment to overheat.

Avo

Cat

Series

Caution:

Do not connect the AVO-A2MINI-WP-F to a telecommunication
outlet wired to unrelated equipment. Making such a connection may
damage the equipment and/or balun. Please ensure all wiring is
“straight-through.”

Reviews: