VONROC S CD505DC, Оригинальное руководство пользователя, Страница: 6 / 56

6
EN
WWW.VONROC.COM
2. MACHINE INFORMATION
Intended use
The machine is intended for driving in and loose-
ning screws as well as for drilling in wood, metal,
ceramic and plastic and for impact drilling in brick,
brickwork and masonry.
TECHNICAL SPECIFICATIONS
Model No. S_CD505DC
Voltage 20V
Chuck capacity 13 mm
Torque settings
21+ Drill mode + Impact
drill mode
No load speed
Position 1:
Position 2:
0-400 /min
0-1500 /min
No load impact rate
Position 1:
Position 2:
0-6400 /min
0-24000 /min
Weight 1.2 kg
Sound pressure level L
PA
89.9 dB(A), K=3dB(A)
Sound power level L
WA
99.9 dB(A), K=3dB(A)
Hand-arm vibration a
h
(Impact drilling in concrete)
14.265 m/s
2
K=1.5 m/s
2
Hand-arm vibration a
h,D
(Drilling into metal)
1.746 m/s
2
K=1.5 m/s
2
Model No CD801AA
Battery Type Lithium-Ion
Voltage 20V
Capacity 2.0 Ah
Recommended charger CD802AA
Weight 0.3 kg
Model No CD802AA
Charger input 220-240V,50Hz 0.4A
Charger output 21V 2.5A
Charging time 2Ah battery 60 minutes
Charging time 4Ah battery 120 minutes
Recommended batteries CD801AA, CD803AA
Weight 0.36 kg
Only use the following batteries of the VONROC
VPOWER 20V battery platform. Using any other batte -
ries could cause serious injury or damage the tool.
CD801AA 20V, 2Ah Lithium-Ion
CD803AA 20V, 4Ah Lithium-Ion
The following charger of the can be used to charge
these batteries.
CD802AA Quick charger
The batteries of the VONROC VPOWER 20V battery
platform are interchangeable with all the VONROC
VPOWER 20V battery platform tools.
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN 62841; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
• Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
• The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2.
1. Machine
2. Battery
3. Battery unlock button
4. Work light
5. On / off switch
6. Torque adjustment ring
7. Chuck
8. Gear selection switch
9. Direction switch
10. Belt hook
11. Operation mode ring
12. Battery LED indicators button
13. Battery LED indicators
14. Charger
15. Charger LED indicators