VonHaus 3500010 Скачать руководство пользователя страница 7

WARNING

PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE

Do not stare at the tool with the blade 

touching any surface. The blade action 

will bounce the tool and may cause bodily 

injury.
Always wear safety glasses or goggles, 

normal prescription eye or sunglasses are 

not safety glasses
Check your area for proper clearance 

before cutting. This will avoid cutting into 

your workbench, the floor, etc.
This product is not a toy. Keep it out of 

reach of children.
People with pacemakers should 

consult their physician(s) before use. 

Electromagnetic fields in close proximity 

to heart pacemaker could cause 

pacemaker interference or pacemaker 

failure. In addition, people with 

pacemakers should:
• 

Avoid operating alone.

• 

Do not use with power switch locked 

on.

• 

Properly maintain and inspect to 

avoid electrical shock.

ADDITIONAL SAFETY INSTRUCTIONS 

FOR BATTERIES AND CHARGERS

Never attempt to open for any reason.
Do not store in locations where the 

temperature may exceed 40 °C.
Charge only at ambient temperatures 

between 4 °C and 40 °C.
Do not cause short circuits. If connection 

is made between the positive (+) and 

negative (-) terminal directly or via 

accidental contact with metallic objects, 

the battery is short circuited and an 

intense current will flow causing heat 

generation which may lead to casing 

rupture or fire.
Do not heat. If batteries are heated to 

above 100 °C, sealing and insulating 

separators
and other polymer components may be 

damaged resulting in electrolyte leakage 

and/or internal short circuiting leading to 

heat generation causing rupture or file. 

Moreover do not dispose of the batteries 

in fire, explosion and/or intense burning

may result.
Under extreme conditions, battery 

leakage may occur. When you notice 

liquid on the battery, proceed as follows:
Carefully wipe the liquid off using a cloth. 

Avoid skin contact.
In case of skin or eye contact, follow the 

instructions below:

Under extreme conditions, battery 

leakage may occur. When you notice 

liquid on the battery, proceed as follows:
Carefully wipe the liquid off using a cloth. 

Avoid skin contact.
In case of skin or eye contact, follow the 

instructions below:
• 

Immediately rinse with water. 

Neutralize with a mild acid such as 

lemon juice or vinegar.

• 

In case of eye contact, rinse 

abundantly with clean water for at 

least 10 minutes.

Consult a physician.

CHARGERS

Never attempt to charge non-

rechargeable batteries.
Have defective cords replaced 

immediately.
Do not expose to water.
Do not open the charger.
Do not probe the charger.
The charger is intended for indoor use 

only.

PACKAGING

Packaging materials are not toys! Children 

must not play with plastic bags! Danger of 

suffocation!

Содержание 3500010





















Отзывы: