VonHaus 3500010, Инструкция по эксплуатации

Страница: 6 / 20

WARNING
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE
putting the tool down.
Do not touch the workpiece or the blade
immediately after operating the tool. They
can become very hot.
VIBRATION.
The declared vibration emission values
stated in the technical data and the
declaration of conformity have been
measured in accordance with a standard
test method provided by EN 60745 and
may be used for comparing one tool with
another. The declared vibration emission
value may also be used in a preliminary
assessment of exposure.
WARNING! The vibration emission value
during actual use of the power tool can
differ from the declared value depending
on the ways in which the tool is used. The
vibration level may increase above the
level stated. When assessing vibration
exposure to determine safety measures
required by 2002/44/EC to protect
persons regularly using power tools in
employment, an estimation of vibration
exposure should consider the actual
conditions of use and the way in which the
tool is used, including taking account of
all parts of the operating cycle such as the
times when the tool is switched off and
when it is running idle in addition to the
trigger time.
MAINTENANCE & STORAGE.
Disconnect the plug from the power
source and/or the battery back from
the power tool before making any
adjustments, changing accessories or
storing. Such preventative safety measures
reduce the risk of starting the power tool
accidentally.
Maintain the power tool. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
Keep blades sharp. Dull or damaged
blades may cause the saw to swerve
or stall under pressure. Always use the
appropriate type of saw blade for the
workpiece material and type of cut.
Store idle power tools out of reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
SERVICE.
Have your power tool serviced by a
qualified repair person using identical
replacement parts only to ensure that the
safety of the power tool is maintained.
ADDITIONAL SAFETY INSTRUCTIONS
FOR JIGSAW
Do not start the tool with the blade
touching any surface. The blade action
will bounce the tool and may cause body
injury.
Allow the tool to come to a complete stop
before putting it down. A running tool
will jerk when the blade tip contacts any
surface.
Do not cut oversized work pieces
Do not cut nails or screws unless you are
using a blade specifically designed for this
purpose. Inspect your material before
cutting
Before switching on the tool, be sure the
blade in not contacting the work piece.
Keep hands away from moving parts and
on the top surface of the work piece. Do
not place hands below work surface while
saw is operating.
Hold tool by insulated grip surface when
performing an operation where the
cutting tool may contact the hidden wiring
or its own cord. Contact the alive wire
make exposed the metal parts of the tool
alive and shock the operator.
3