VonHaus 2514086, Инструкция по эксплуатации

Страница: 7 / 12

FOOT ASSEMBLY
Take the Heater and turn it upside down, ensure to lift
the Heater carefully, do not tip.
Take the 4 legs and align over the holes in the base
of the Heater.
Screw in each screw and ensure the feet are secured,
turn the Heater upright onto its legs.
NOTE:
Screwdriver not supplied.
Thermostat Dial:
Turn the dial till you hear a click,
this will be the current room
temperature.
Turn the dial past and when the
room has reached its desired
temperature turn the dial back
until it clicks, the heater will now
maintain this heat.
Flame Effect Switch:
Switch on to activate the
flame effect.
Dimmer Dial
Press this to active low
heating.
Press this along with the
other Switch to active high
heating.
Fan Switch:
Use alone for cool air.
CONTROLS