4
CONTROLS
BASE ASSEMBLY
1. Take the two sections of the base
(4)
and align pins
on one with the holes in the other. Firmly press down
to connect them securely.
IMPORTANT:
Ensure you do not use excessive force
as this may damage the Base.
2. Invert the Main Unit
(3)
and align the assembled
base with the 4 screw holes on the bottom of the
Main Unit. Use the 4 Fixing Screws
(6)
supplied to
attach the two together.
Ensure the Base is completely secure before standing
the Tower Fan in its upright position.
TIMER: This can be set to up to 2 hours, when set the
Tower Fan with switch off after the selected amount
of time and expired.
NOTE:
For continuous use of the Tower Fan set the
dial to ON position.
NOTE: Both the Timer and Speed control must be on
for the product to operate.
SPEED CONTROL:
0 = Off
1 = Low Speed
2 = Medium Speed
3 = High Speed
SWING: This sets the Tower fan to motion
from left to right.
Pressing again will stop the motion.
Содержание 2300014
Страница 1: ...31 TOWER FAN 2300014 Instruction Manual...
