25
GB
GB
The battery indicator LED is flashing red.
Charge the NiMH batteries, or, if using AAA alkaline batteries,
replace the alkaline batteries. (Do not mix NiMH and alkaline
batteries.)
The battery LED is solid red while the
power adapter is connected to the
e
Mag 43.
A battery error has occurred. Unplug the power adapter from
the
e
Mag 43 and plug it in again. Charge the NiMH batteries
for at least 2 hours. If using AAA alkaline batteries, replace the
alkaline batteries. If the problem continues, disconnect the
power adapter and call your
e
Mag 43 merchant.
The battery indicator LED does not flash
green, even though the power adapter is
connected and plugged into a wall socket.
Ensure that the small end of the power adapter is properly plugged
into the unit's power port.
Ensure that the outlet has power and is not malfunctioning. If the wall
outlet is connected to a wall switch, make sure that the switch is on.
The NiMH batteries are not charging.
Ensure that the small end of the power adapter is properly
plugged into the unit's power port.Ensure that the batteries are
inserted properly. Observe the correct polarity.Ensure that the
outlet has power and is not malfunctioning. If the wall outlet is
connected to a wall switch, make sure that the switch is on.
There are smudges or blemishes on the
screen.
Clean the LCD display and the camera window.
The text is too small to read.
Press the yellow
Magnification button
to increase the
magnification level.
The text is too large to read.
Press the yellow
Magnification button
to cycle through to
a lower magnification level.
