background image

10 

pink  noise  “ball.”    If  your  former  speakers  were  placed  close  together  to  achieve  center  fill,  try 
spreading the VR-5’s further apart. Their wide dispersion enables a larger sound stage. 

*Note: if the speakers can not be separated more than a few feet due to room considerations, 
as in a video application, it may be necessary to toe the speakers 

outwards

 in order to gain a 

wide sound stage and reduce the tendency towards monophonic image focus.

 

TOE-IN 

When placing the speakers further apart than 8 feet, try toeing them in towards you, listening 
for the “ball” to lock in

. It really helps to have two people moving the speakers while you sit in the 

listening position, giving them orders. Toe-in is often critical, with only 1" movements being very 
apparent. When you have found the correct spacing and listening distance, you will immediately  
know it, since the image lock-in is very obvious. The pink noise will become a very strong “ball” of 
sound, floating in-between the speakers. Keep moving the speakers until you hear this ball of sound. 
As you move the speakers either closer together or further apart, and experiment with toe-in, you will 
hear changes that enable you to know if you are headed in the right direction. 
It isn’t really difficult, it’s fun. Of course, experimenting with several types of placement schemes is 
valuable, for it will teach you how the speakers interact with your particular room. Only by careful 
experimentation will you find that “magic” sweet spot for your new VR-5 Anniversary system. 
 

REAR AMBIENCE DRIVER ADJUSTMENT: 

The VR design has a rear-firing ambience driver which adds depth enhancement and 360-degree 
timbre fill-in. When breaking in the speakers, leave the 

Spatial Dimension Control

 all the way up in 

order to break-in the driver fully. However, when optimizing the imaging using the pink noise test 
documented above, turn the ambience driver off by rotating the control fully counter-clockwise.  
Once the speaker location has been determined, it is time to add some rear ambience. While listening 
to a variety of naturally recorded music, dial in successively more ambience, listening carefully to the 
change.  If  your  rear  wall  behind  the  speakers  is  highly  reflective,  only  a  little  ambience  will  be 
necessary if the speakers are fairly close to the wall.  
In some situations, where the rear wall is highly reflective and the driving amp/cables are somewhat 
overly detailed, it may be possible that

 no

 rear fill is necessary nor desirable. If you hear “brightness” 

creep into the overall balance, it may be time to back off on the 

Spatial Dimension Control

.  In a room 

that’s fairly dead, with soft sounding gear, it may be necessary to use the 

Spatial Dimension Control

 

fully on. 

 
 

Содержание ANNIVERSARY VR-5
















Отзывы: